Poly-Imide Wire Enamel (BAWATHERM 1001)
BAWATHERM 1001 is a Class 220 modified Poly-imide based wire enamel, wires coated with BAWATHERM 1001 has resistance to refrigerants R-12 / R-22.
It can be used as top coat or a Sole coat. It is a very good replacement of traditional polyamide-imide enamel and its cresol soluble and free from NMP so application made easy.
|* VISCOSITY||PROPOSED WIRE RANGE (in mm)|
|27±1||300-500||Up to 0.8|
|34±1||1000-1500||0.8 - 1.6|
* Viscosity by Viscometer / Brook Field at 23°C in Cps
|Bending Point oC(Solid Block)||215-225|
Please note that all above mentioned values may be changed according to the machine.
|RECOMMENDED THINNER||Thinner PW/E|
|PACKING :||Bawatherm 1001|
|210 Kg in mild steel |
21 Kg in mild steel drums.
|SHELF LIFE||One year from date of manufacturing if stored in sealed container (at room temperature 25 0C).|
|Diameter of Bare wire||.500|
|Build up of enamel||0.065 mm|
Mandrel Winding (15% pre stretch 1xd)
|Peel Test (nxd)||-|
|Abrasion (AV) (Unidirectional)||10.0|
|Cut through||3600 C /2 min|
|Heat shock||2d/2400 C/30min|
|Break Down Voltage kV||at RT||8.5 kv|